HEADSET / ELECTRET MICROPHONE ADAPTER

*** TO BUY WITH CONFIDENCE, YOU ARE GETTING PAYPAL PROTECTION ! ***  

We designed and built this Microphone Adapter with a purpose to have an ability to hook the computer headset or other microphone up to the ICOM / KENWOOD radios or to our known Microphone Equalizer/Echo Processor.



This Microphone Adapter works with Electret type of microphones and fits to any type of the radios with the 8 pin microphone round connector.

Almost all of the PC Headsets available on the market have the Electret microphones.

There are three pushing knobs on its front panel. The UP, DOWN and PTT knobs. Pushing the UP or DOWN knob allows you to change the working frequency of your radio or get the other function of the UP and DOWN keys your hand microphone HM-36 was set on. Pushing the PTT knob brings your radio into TX transmit mode.

On the front side wall you find two connectors. The RCA and 3.5mm Audio connector. You can hook the foot pedal switch to the RCA connector using it to get your radio into TX transmit mode.

Connect the PC Headset microphone jack or other Electret microphone to the 3.5mm Audio connector.

Size of the box - 65 x 50 x 40 mm
Length of the mic cord with 8 pin connector on its end - 25 cm
Weight - 0.05 kg

 

There is a video had been recorded when we tested this Microphone Adapter

 

We take PayPal and you can pay pushing "Buy Now" button.

Click the button below and buy the Microphone Adapter to the ICOM Radios

19 USD + 6 USD shipping

Pay for your item

 

Click the button below and buy the Microphone Adapter to the KENWOOD Radio

19 USD + 6 USD shipping

Pay for your item