739/144 MHZ QO-100 RX CONVERTER BOARD

*** TO BUY WITH CONFIDENCE, YOU ARE GETTING PAYPAL PROTECTION ! ***

 

OUT OF STOCK.

SHOULD GET MORE AT JUNE 25 - 27 !

 

This receiving converter was designed and described by David Bowman G0MRF in his article "G0MRF UHF-VHF Receive Converter for use with a satellite LNB" in open source on AMSAT-UK web site. I am includind printed copy of this article with this converter.

Click on this pic to get it large

This converter was designed to use it to receive the signals from modern QO-100 or EsТhail-2 amateur radio satellite. This satellite was put on the geostationary orbit at position 25.9∞E. Its uplink frequency is on 2.4 GHz band and downlink frequency is on the 10 GHz band. So the low cost Satellite TV dish (60cm min) with 10 GHz (LO 9.75 GHz) modified LNB can be used to receive its signals. Modification of LNB represents a replacing of 27 MHz crystal in LO of LNB to the high stability TCXO of 27.000 MHz. Not all LNB will work there. It needs the modern LNB with PLL synthesizer in its LO.

Using this converter along with the low cost Dongle SDR tuned around 739 MHz or 2 meters band receiver tuned in a range of 144.550 - 144.800 MHz you can receive the signals of narrow band transponder of this satellite.

Circuit Diagram of the Converter (Click on this pic to get it large)

I am not providing information where you can buy the LNB or how to modify it. Also I can not help you about installation and pointing the dish. This all things you should know and do by yourself.

More information about this satellite, its transponder band-plan and antenna beam coverage you can find in the Internet.

Also on YouTube you find a lot of videos showing how people works with this satellite and their equipment. Just do a search by "QO-100" words on YouTube.

Download a copy of the description I am including with the Converter board there

 

THIS SALE IS INCLUDED ASSEMBLED 739/144 MHZ QO-100 RX CONVERTER BOARD AND POWER CONNECTOR