146/28 MHz ASSEMBLED IN BOX TRANSVERTER WITH ATTENUATOR BOARD

*** TO BUY WITH CONFIDENCE, YOU ARE GETTING PAYPAL PROTECTION ! ***

This Assembled in Box Transverter contains the TRANSVERTER BOARD and ATTENUATOR BOARD. This means it needs 1 ... 10 W driving power and suppose to use through the Antenna connector of your radio.

(Pictures below show the 144 MHz Transverter just as a sample. You get it with the front panel sticker depending of the band you bought the Transverter on.)

It is very easy to use this transverter. Just hook it up to your base HF Radio antenna connector.

New model of Attenuator Board contains the RF Sense PTT Switch so this transverter works fine without PTT cable connected to the base radio.

 

Technical specifications

RF range - 144 ... 148 MHz
IF range - 26 ... 30 MHz (146.000 MHz at 28.000 MHz)
Driving power - 1 ... 10 W
LO frequency - 118 MHz (3rd overtone of 39.3333 MHz crystal)
LO frequency stability - +/- 5 ppm
Output power - 10 ... 15 W
RX gain - typ. 20 dB
Noise figure - typ. 1.0 dB
Image rejection - typ. 70 dB
PTT control - RF Sense VOX or by PTT Cable (close to ground)
Supply voltage - +13.8 V DC (+12 ... 14 V DC)
Current consumption - typ. 2 A (TX)
TX Output transistor - RD15HVF1
RX Input transistor - BF998
Dimensions (mm) - 80 x 45

 

This TRANSVERTER goes with the power cord and English description of the Attenuator and Transverter boards and instruction how to hook it up to your radio.

To read more information and get technical details of the boards pushing the links below.

Technical specification of the 146/28 MHz TRANSVERTER BOARD is here
Technical specification of the ATTENUATOR BOARD is here
Setting up manual of the Assembled TRANSVERTER WITH ATTENUATOR BOARD is here
More pictures of the Assembled Transverters is here

Some hint.. Since this Assembled Transverter contains the Attenuator Board with the bypass mode you can easily get the multiband VHF system buying the other band transverter and hook it up in chain with this transverter and use one coax cable between your radio and transverter. You would not need to unscrew or change the cables from other transverter. Just power ON the needed transverter and OFF the other.

 

We take PayPal and you can pay pushing "Buy Now" button.

Click the button below and buy the ASSEMBLED TRANSVERTER WITH ATTENUATOR BOARD INSTALLED

SHIPPING IS INCLUDED IN THIS PRICE!

146/28 MHz ASSEMBLED TRANSVERTER WITH ATTENUATOR BOARD

85 USD

Pay for your item