148/28 MHz ASSEMBLED IN BOX TRANSVERTER WITHOUT ATTENUATOR BOARD

*** TO BUY WITH CONFIDENCE, YOU ARE GETTING PAYPAL PROTECTION ! ***

This Assembled in Box Transverter contains JUST the TRANSVERTER BOARD. This means it needs LOW LEVEL 1 to 50 mW driving power and suppose to use through the Transverter output connector of your radio.

(Pictures below show the 144 MHz Transverter just as a sample. You get it with the front panel sticker depending of the band you bought the Transverter on.)

It is very easy to use this transverter. Just hook it up to your base HF Radio TRANSVERTR LOW LEVEL OUTPUT connector and use the PTT Cable between your radio and transverter.

 

Technical specifications

RF range - 146 ... 150 MHz
IF range - 26 ... 30 MHz (148.000 MHz at 28.000 MHz)
Driving power - 1 ... 50 mW (0.05 W max.) or 0 ... 17 dBm
LO frequency - 120 MHz (3rd overtone of 40.000 MHz crystal)
LO frequency stability - +/- 5 ppm
Output power - 10 ... 15 W
RX gain - typ. 20 dB
Noise figure - typ. 1.0 dB
Image rejection - typ. 70 dB
PTT control - Contact closure to ground by PTT Cable
Supply voltage - +13.8 V DC (+12 ... 14 V DC)
Current consumption - typ. 2 A (TX)
TX Output transistor - RD15HVF1
RX Input transistor - BF998
Dimensions (mm) - 80 x 45

 

This TRANSVERTER goes with the power cord and English description of Transverter board and instruction how to hook it up to your radio.

To read more information and get technical details of the boards pushing the links below.

Technical specification of the 148/28 MHz TRANSVERTER BOARD is here
Setting up manual of the Assembled TRANSVERTER WITHOUT ATTENUATOR BOARD is here
More pictures of the Assembled Transverters is here

 

We take PayPal and you can pay pushing "Buy Now" button.

Click the button below and buy the ASSEMBLED TRANSVERTER WITHOUT ATTENUATOR BOARD

SHIPPING IS INCLUDED IN THIS PRICE!

148/28 MHz ASSEMBLED TRANSVERTER WITHOUT ATTENUATOR BOARD

75 USD

Pay for your item