224/28 MHz ASSEMBLED IN BOX TRANSVERTER WITH ATTENUATOR BOARD
This Assembled in Box Transverter contains the TRANSVERTER BOARD and ATTENUATOR BOARD. This means it needs 1 ... 10 W driving power and suppose to use through the Antenna connector of your radio.



It is very easy to use this transverter. Just hook it up to your base HF Radio antenna connector.
New model of Attenuator Board contains the RF Sense PTT Switch so this transverter works fine without PTT cable connected to the base radio.
This TRANSVERTER goes with the power cord and English description of the Attenuator and Transverter boards and instruction how to hook it up to your radio.
To read more information and get technical details of the boards pushing the links below.
Technical specification of the 224/28 MHz TRANSVERTER BOARD is here
Technical specification of the ATTENUATOR BOARD is here
Setting up manual of the Assembled TRANSVERTER WITH ATTENUATOR BOARD is here
More pictures of the Assembled Transverters is here
Some hint.. Since this Assembled Transverter contains the Attenuator Board with the bypass mode you can easily get the multiband VHF system buying the other band transverter and hook it up in chain with this transverter and use one coax cable between your radio and transverter. You would not need to unscrew or change the cables from other transverter. Just power ON the needed transverter and OFF the other.
|