RA MITSUBISHI AMPLIFIER MODULE BOARD
TO NOTE PLEASE:
This sale does not include MITSUBISHI or TOSHIBA RF Amplifier Module itself !
This RA Amplifier Module Board was designed to work with any type of MITSUBISHI MOSFET RF POWER Modules in H2 or H2S cases. It will also work with some type of TOSHIBA SAV modules.
List of some compatible RF modules is below:
RA18H1213G, RA60H1317M, RA60H4047M, RA60H1317, RA60H4047, RA30H1317M, RA30H4047M, RA30H1317, RA30H4047, RA35H1516M, RA80H1415M, SAV32, SAV33
It will also work with some other RF Amplifier Modules which are not included in this list.
This RA Amplifier Module Board contains 6db Input Attenuator, BIAS voltage stabilizing circuit and DC blocking capacitors.
It suppose to be installed allong with the RA Module itself onto heatsink.
Input and output lines are matched 50 Ohm load. To switch it to the TX(Transmit) mode to close PTT contact to the ground.
PCB Material - FR4
Size 67 x 23 mm
Be carefull !
Maximal input driving power of this Board (with 6 dB ATT installed) is 1 W.
DO NOT EXCEED THIS !!!
Download a copy of the description I am including with the board here